ERT45R programming kit to test the rotary Bosch VP44-VR30 pumps.
The kit includes:
- Programming card that allows Simulator ERT45R to actuate the necessary functions to test this type of pump.
- basic cable (2 mt. Length)
- adapter cables
- servicing manual with step-by-step illustrated instructions
- Registration form to receive the test plan for the calibration of Bosch VP44/VR30 pumps. The available
test data are supplied separately free of charge, after having accepted the licence agreement.
AS25 electronic sensor to measure the travel of the timing-device piston on diesel pumps.
The kit includes the mounting adapters for the following pumps: Bosch VE, Zexel VE, Delphi DPC, DPC, DP200, DPS.
ERT45R programming kit to test the rotary Delphi DPCN pumps.
The kit includes:
- programming card that allows ERT45R Simulator to actuate the necessary functions to test this type of pump
- basic cable (2 mt. Length)
- adapter cables 81.04.002 (Fiat), 81.04.003 (Ford), 81.04.004 (Volvo), 81.04.005 (Clio-Kangoo 1st generation), 81.04.006 (Clio-Kangoo 2nd generation).
- servicing manual with step-by-step illustrated instructions
- Registration form to receive the test plan for the calibration of Delphi DPCN pumps. The available test data are supplied separately free of charge, after having accepted the licence agreement.
ERT45R programming kit to test Zexel Covec-F1/F2 rotary pumps.

The kit includes:
- Programming card that allows Simulator ERT45R to actuate the necessary functions to test this type of pump.
- basic cable (2 mt. Length)
- adapter cables 81.06.231 (Nissan TD27, CD20), 81.06.234 (Isuzu 4JG2), 81.06.235 (Hyundai-Mitsubishi, 81.06.236 (MAZDA) are included
- servicing manual with step-by-step illustrated instructions
- test data to calibrate some of the pumps which can be plugged to the adapter cables 81.06.231, 81.06.234, 81.06.235
Kit di prova delle pompe rotative Zexel Covec-T
ERT45R programming kit for Zexel Covec-T pumps.
The kit includes:
- microchip card to program the simulator and actuate the necessary functions to test this type of pumps
- basic cable (2 mt. Lenght)
- adapter cable 81.04.803
- illustrated step-by-step instructions manual
- test data to calibrate the pumps which can be plugged to the adapter cable 81.04.803
ERT45R programming kit for Bosch H, M, P, R in-line pumps.
The kit includes:
- programming card that allows the ERT45R Simulator to actuate the necessary functions to test this type of pump
- basic cable (2 mt. Length)
- adapter cable 81.03.104 (similar to Bosch 0 986 610 104).
Extra adapter cables are available on request
- illustrated step-by-step instructions and servicing manual
- test data to calibrate the pumps which can be connected to the adapter cable 81.03.104
ERT45R programming kit to test Bosch VE-HDK rotary pumps (inductive actuator)
Kit to program ERT45R Simulator, to test Bosch VE-HDK pumps (2nd generation technology, with inductive actuator).

The kit includes:
- programming card that allows ERT45R Simulator to actuate the necessary functions to test this type of pump
- basic cable (2 mt. length)
- Illustrated step-by-step instructions and servicing manual
- Adapter cable 81.02.430 (Similar to Bosch 0986612430). Additional cables are available, under request
- Test data to calibrate the pumps that can be connected to the adapter cable 81.02.430
Testing accumulator
Test accumulator for fixing the pressure control valve of the common-rail pumps. This kit is supplied with:
- a pressure control valve (ref. BH 0 281 002 500)
- a pressure sensor up to 1500 BAR
- a temperature sensor up to 110 °C
- n. 5 high pressure steel pipes up to 2000 BAR.
TP03 test instrument for detection of pressure peaks and leakage.
TP03 is a digital manometer up to 1500 BAR equipped with memory, to display the peak pressure as well as the effective pressure.
Furthermore, TP03 calculates the leakage time, that is the necessary time to pass from an higer level of pressure to a lower one (both limits are programmable).
For these features TP03 is the most appropriate electronic instrument to be used in conjunction with an injector tester, to automatically relief the Nozzle Onpening Pressure (NOP) of the conventional diesel fuel injectors, as well as NOP1 NOP2 of the 2-stage (double spring) injectors.
By a T connection (M14x1,5), the pressure sensor is insterted into the hydraulic circuit (on the pop tester, between the outlet from the pump and the injector). TP03 is an add-on to any hand operated injector tester and doesn't enahce the hydraulic performances of the injector tester.
When connected directly on vehicle, the TP03 can also be used to test the pressure and detect leakages in Common-rail systems.
SP02 printer is the optional extra (to be ordered separately) in order to print the test report, with company details.
24 months warranty.
Filter
DIT31 fuel filter (15 micron)
DIT31 - Test bench for diesel injectors.
The test bench DIT31 is a modular solution to test the common rail injectors (the additional TC38 triggering unit is required) as well as the conventional and 2 stage (double spring) diesel injectors.
The applied technology allows the test parameters to be determined reliably on each injection, with greater precision and resolution than using on average long test cycles to collect a measurable quantity of fuel.

Main features:
- Main tank 3 lt. with 15 micron filter
- Separated container for the collection of the contaminated liquid
- Large atomization chamber with smoke extraction and halogen lamp
- Pneumatic operated pump unit, the standard version is suitable up to 1400 BAR (compressed air 8-10 BAR is required). Special versions can be installed as optional to generate more pressure and flow.
- Pneumatic vice for the automatic clamping of the injector
- Digital manometer with the reading scale selection (BAR/PSI)
- Printer to generate the test report
- Program for conventional injectors: (1) measurement of the NOP (nozzle opening pressure) and calculation of the back-leakage time.
- Program for Double-spring injectors: (2) measurement of the NOP1 (1st stage) and NOP2 (2nd stage), calculation of the back-leakage time and determination of the K factor.
- 2 programs for common rail injectors: (3) identification of the return flow (leakage time), (4) of the opening delay, the injection time and the injected fuel quantity (dp).
- 24 months warranty. User's and servicing manual in English language.
Training on ERT45R (application Denso V3/V4/V5).
Training service for the use of the ERT45R Simulator with the kits for the test of DENSO ECD-V3/V4 & DENSO ECD-V5 pumps..

Service features:
- The training course will take place in Italy at DETEQ headquarter
- Duration of 1 day ( 8 working hours )
- Maximum for 2 participants
- Is held in English Language
- The standard training is destined to participants already operators of diesel systems.
- Is excluded the technical instruction on the technology of the components which are object of the machine operativity. This kind of service can be provided only upon agreement with DETEQ.
-At the end of the training will be issued a frequency profit Certificate

The course includes the training provided by DETEQ Technicians, for:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.
Adaptyer cable BMW 318
Adapter cable for BMW 318 pumps, fitted with test data ( BH 0 986 612 443)
Cavo adattatore pompe BH VE (Rif. BH 0 986 612 441 - KDEP 1865/12) - PSA
Adapter cable for BH pumps VE..R 520 (PSA -Mercedes 250) - 0 986 612 441, fitted with test data
ALI15 - Power supply for pump H
Stabilised adjustable power supplier for electronic actuator test and adjustment applied on Bosch H in-line pumps.

- Output voltage: 0÷15 Vcc;
- Output current: 0÷20 Amp;
- Power in continuous service at the maximum voltage: 12 Amp;
- Input voltage: 230 Vca - 50 Hz
Adapter cable
Adapter cable for Ford pumps BH VE (BH ref. 0 986 612 446)