Simulator ERT45R
ERT45R, the revolutionary electronic simulator for testing the electronically controlleddiesel injection pumps (both common rail and conventional).
The development of such a tool is the result of many years of research that have allowed the creation of a single universal device, programmable by smartcard (microchip cards). In this way, the field of application of the simulator (basic unit) is built to match the current needs.
The initial investment is preserved and at any time can be extended, choosing from the available programming kits (currently 21). Any programming kit includes:
- programming card (software)
- instruction manual with step-by-step illustrations.
- base cable (s) (length 2 m)
- adapter cable (s) depending on the type of connector on the pumps.
In order to use ERT45R, at least one programming kit is mandatory.
Ring nut wrench for Cummins common rail injectors
Ring nut wrench to remove the coil of Cummins common rail injectors installed on Scania XPI
Ring nut wrench for Cummins common rail injectors
Ring nut wrench to remove the nut with the teeth of Cummins common rail injectors installed on Scania XPI
ERT45R programming kit to test Catepillar C6.6 commn rail pumps
PROGRAM KIT FOR CATERPILLAR C6.6 CR PUMPS.
The kit includes:
- program card to allow the ERT45R Simulator to actuate the necessary functions to test this type of pumps
- Set of adapter cables
Installation tools kit for flanged c/rail pumps DENSO HP0 and BOSCH CP2
Set of tools for the installation of the test bench for industrial pumps: C/rail DENSO HP0 NE SENSOR flanged pump (094000-0342) and BOSCH C/rail CP2 pumps.
Universal Test Bench crandle
Sensor holder
Coupling with reference notch cone 30
Universal mounting flange complete with O-ring
Installation tools kit for C/rail pumps DENSO HP0 G Sensor and NE 2 Sensor
Set of tools for the installation of the test bench for C/rail pumpsDENSO HP0 G Sensor (094000-480) and NE 2 Sensor (094000-0240):
Pair of supports H=75 mm with adapter plate
Adapters plate for RPM sensor
Coupling reference notch cone 25
Hydraulic connections
Set of hydraulic connections for CATERPILLAR C6.6 pumps
Universal hydraulic connections for heavy duty common rail pumps.
Items included:
- Backflow by-pass set for CP2/HP0 pumps(**)
- Test pipes with propers adapters fittings for CP2/HP0 pumps
- External flowmeter for common-rail Hevy-Duty pumps

(**) This item is strictly required as the feeding capacity of the test bench's pump is not enough to ensure the correct feeding of low pressure (440 liters / hour)
Programming kit for DENSO HP0 CR pumps
The kit includes:
- program card to allow the ERT45R Simulator to actuate the necessary functions to test this type of pumps
- Set of cables for C/rail DENSO HP0 pumps: NE Sensor flanged (094000-0342) and NE with 2 sensors (094000-0240).
- Set of cables for C/rail DENSO HP0 pumps G Sensor (094000-480)
- Illustrated step-by-step instructions manual
Training service
Training service for the use of the ERT45R Simulator with the kits for the test of ZEXEL VRZ pumps. This is not a full training concerning the complete overhault of this pump.
The matters of this training are the following:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.
- Location: in Italy at DETEQ headquarter
- Duration: 1 day (8 working hours)
- Maximum number of attenders: 2 diesel specialists having skills on this type of pump
- Is held in English Language
- Individual Certificate of Training is delivered
Quick clamping system for common rail injectors Cummins on Scania XPI on DIT31 test bench
Quick clamping system for common rail injectors Cummins on Scania XPI on DIT31 test bench
KIT sensore CPS ( carriage position sensor)
Sensor kit for CPS ( carriage position sensor) on Delphi DP210 pumps
Corso di formazione Caterpillar C6.6
Training service for the use of the ERT45R Simulator with the kits for the test of Common rail Caterpillar C6.6 pumps with resistive and inductive actuator.

Service features:
- The training course will take place in Italy at DETEQ headquarter
- Duration of 1 day ( 8 working hours )
- Maximum for 2 participants
- Is held in English Language
- The standard training is destined to participants already operators of diesel systems.
- Is excluded the technical instruction on the technology of the components which are object of the machine operativity. This kind of service can be provided only upon agreement with DETEQ.
-At the end of the training will be issued a frequency profit Certificate

The course includes the training provided by DETEQ Technicians, for:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.
Shaft sensor
Sensor for the test bench shaft for application Caterpillar C6.6
Pump mounting kik
Set of tools for the installation of the test bench of caterpillar C6.6 pumps:
- Flange
- Coupling
- Square support with sensor for the timing of Caterpillar C6.6 pumps.
Hydraulic connections
Hydraulic connections between the CAT C6.6 pump and the external lube 8217
Lubrication fittings
Set of fittings for connections with test bench equipped with the lubrication system.
kit per prova valvole pressione pompe VRZ
Zexel VRZ kit for testing the pressure and flow of valve out and valve head