Categories
Secchiello strumentato - configurazione base
This device is necessary to make any test bench compatible for the essential requirements of controlling the digitally controlled pumps (Bosch VP44-VR30, Delphi DP210 and Epic, Denso ECD-V3/V4/V5).
Furthermore, the special coupling system (bench side) is provided in order that once the adjustiment of the pump timing is done, no rotation is necessary for the removal of the pump from the test bench.
The bracket is suitable to be installed on any test bench having center of the rotation axel at 125 mm from the base. In other cases, specific spacers are available.
Cavo per iniettori common rail Denso su Toyota
Cable for Denso common rail injectors, 4 poles on Toyota
Kit adattatori per VTR110 su pompa VP29/30 e VP44
Adapters kit for VTR110 on pump VP29/30 and VP44
Kit di prova delle pompe rotative Denso ECD V5.
The kit includes:
- Programming card that allows Simulator ERT45R to actuate the necessary functions to test this type of pump.
- basic cable (2 mt. Length)
- adapter cables
- servicing manual with step-by-step illustrated instructions
- Registration form to receive the test plan for the calibration of EDC-V5 pumps. The available test data are supplied separately free of charge, after having accepted the licence agreement.
Cavo adattatore per pompe Zexel Covec-F su motori MAZDA WLT
Adapter cable for Zexel Covec-F pumps application on MAZDA engines
Cavo adattatore per pompe Zexel Covec-F su motori HYUNDAI-MITSUBISHI (L200 - motori 4D56)
Cable adapter for Zexel Covec-F pumps in HYUNDAI (MITSUBISHI) engines ( L200 4D56 engines)
Cavo adattatore per pompe Zexel Covec-F su motori ISUZU 4JG2
Adapter cable for Zexel Covec-F pumps application on ISUZU 4JG2 engines
Kit per test elettrico in condizioni statiche del sensore RPM pompe VP con OTA
Kit for the electric test in static conditions of the rpm sensor on VP pumps with OTA
Piastrina adattatore prova anticipo per pompe DENSO V
Adapter plate for DENSO ECD V3/V4/V5 pumps for the advance reader
Steel Test Piping (ØE 6 ≠1,85 l=450mm) M12x1,5/14x1,5 common rail application. Covered with rubber for pumps VR
Tubo ricoperto in gomma
Steel Test Piping (ØE 6 ≠1,85 l=600mm) M14x1,5/14x1,5 common rail application. Covered with rubber
Corso di formazione per l'utilizzo del simulatore ERT45R e del kit per la prova delle pompe Bosch VE con attuatore resitivo e induttivo.
Training service for the use of the ERT45R Simulator with the kits for the test of BOSCH VE pumps with inductive and resistive actuator. This is not a full training concerning the complete overhault of this pump.
The matters of this training are the following:
- Performance features of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. The participants will be first instructed and then followed step by step by our technical personnel for practical exercises.
- Location: in Italy at DETEQ headquarter
- Duration: 1 day (8 working hours)
- Maximum number of attenders: 2 diesel specialists having skills on this type of pump
- Is held in English Language
- Individual Certificate of Training is delivered.
Kit to program ERT45R Simulator in order to test Bosch VE-EDC pumps (1st generation technology, with resistive actuator).
The kit includes:
- programming smartcard that allows ERT45R Simulator to actuate the necessary functions to test this type of pump
- basic cable (2 mt. length)
- adapter cable 81.02.434 (similar to Bosch 0986612434). Additional cables are available, under request
- Illustrated step-by-step instructions manual
- Test data to calibrate the pumps that can be connected to the adapter cable 81.02.434
Training for the use of the ERT45R simulator with the programming kit for testing the Bosch CP1/CP3/CP4 common rail pumps.
Training for the use of the ERT45R simulator with the programming kit for testing the Bosch CP1/CP3/CP4 common rail pumps.

Service features:
- The training course will take place in Italy at the DETEQ site
- Duration of 1 day
- Maximum for 2 participants
- It is taught in English
- Standard training is intended for participants who are already operators of diesel systems.
- Technical instructions on the technology of the components that are the object of the operation of the machine are excluded. This type of service can only be provided with DETEQ.
- At the end of the training a certificate of attendance will be issued

The course includes training provided by DETEQ technicians, for:
- Performance characteristics of the products
- Details and installation problems
- Methods of use
- Maintenance
- Practice with the help of DETEQ technicians. Participants will first be instructed and followed by our technical staff for practical exercises.
Kit di prova delle pompe rotative Zexel Covec F1-F2/SP.
The kit includes:
- Programming card that allows Simulator ERT45R to actuate the necessary functions to test this type of pump.
- basic cable (2 mt. Length)
- adapter cables 81.06.231 (Nissan TD27, CD20), 81.06.234 (Isuzu 4JG2), 81.06.235 (Hyundai-Mitsubishi, 81.06.236 (MAZDA) are included
- servicing manual with step-by-step illustrated instructions
- test data to calibrate some of the pumps which can be plugged to the adapter cables 81.06.231, 81.06.234, 81.06.235
Kit di prova delle pompe rotative Bosch VP44, VR30
Il kit include:
- Scheda di programmazione che consente al simulatore ERT45R di attivare le funzioni necessarie per testare questo tipo di pompa.
- cavo base (lunghezza 2 mt)
- cavi adattatori
- manuale di manutenzione con istruzioni illustrate passo-passo
- Modulo di registrazione per ricevere il piano di test per la calibrazione delle pompe Bosch VP44/VR30. Disponibile
i dati di test vengono forniti separatamente separatamente, dopo aver accettato il contratto di licenza.
Cavo adattatore per pompe Zexel Covec-F su motori NISSAN TD27, CD20
Cable adapter for Zexel Covec-F pumps application on NISSAN TD27, CD20 engines
Kit di misura anticipo su Pompe Bosch VE, Zexel, Delphi DPC-DPCN-DP200-DPS
The kit includes the mounting adapters for the following pumps: Bosch VE, Zexel VE, Delphi DPC, DPC, DP200, DPS.
Kit di prova delle pompe rotative Delphi DPCN
The kit includes:
- programming card that allows ERT45R Simulator to actuate the necessary functions to test this type of pump
- basic cable (2 mt. Length)
- adapter cables 81.04.002 (Fiat), 81.04.003 (Ford), 81.04.004 (Volvo), 81.04.005 (Clio-Kangoo 1st generation), 81.04.006 (Clio-Kangoo 2nd generation).
- servicing manual with step-by-step illustrated instructions
- Registration form to receive the test plan for the calibration of Delphi DPCN pumps. The available test data are supplied separately free of charge, after having accepted the licence agreement.